AL33 - Low Noise Amplifier

Applications: ● IF&Driver Amplifier ● Cellular,PCS,GSM,UMTS. ● Wireless Date,Satellite Terminals.

Download product specification:SMO3035.PDF FEATURES ● Excellent Linearit ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● FC/APC SC/APC   DESCRIPTION The SMO3035 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 3.5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; T mb＝25℃, VB＝3.5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310±20nm S Responsivity V/W 950 - - λ=1550±20nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 90 - 60 channels flat; OMI=3.5% measured at 543.25 MHz; Optical power receiving at 0dBm CTB Composite triple beat dB 70 - - CSO Composite second order distortion dB 65 - - CNR Carrier to noise ratio dB 50 - - S22 Output return loss dB -11 - - f=40 to 870 MHZ Itot Total current consumption mA 70 - 100 VB=3.5V The module normally operates at VB=3.5 V(±0.5)

Download product specification:SMO2506.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standarding ● FC/APC SC/APC   DESCRIPTION The SMO2506 has an FC/APC or SC/APC connector. Pin Description.The amplifier supply voltage pin is connected to 6V(DC) . The CATV Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25  VB＝6V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Responsivity V/W 850 - - λ=1300nm Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Output voltage dBµV - 93 - 60 channels flat; measured at 543.25 MHz; Optical power receiving at -1dBm  Composite triple beat dB 62 - - Composite second order distortion dB 55 - - Carrier to noise ratio dB 50 - - Output return loss dB 10 - - f=40 to 870 MHZ Total current consumption dB 220 - 270 VB=6V The module normally operates at VB=6 V(±0.5)

Mini V-ONU F01.pdf 1. SCOPE This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.  2. ELECTRICAL SEPCIFICATION 2.1 INPUTRANGE 2.1.1 OPTICAL INPUTRANGE Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.  2.2 OUTPUT LEVEL The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.  2.3 ESD SENSITIVITY The optical receiver should operate within specification of ESD sensitivity according to the table below: ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF MAX=500 1 V 2.4 RF PERFORMANCE REQUIRMENT 2.4.1 BANDWIDTH The optical receiver should operate within specification of band width from 47MHz to 1000MHz 2.4.2 OUTPUT RETURNLOSS The exact output return loss should apply the specification that S22 ≦-14dB 2.4.3 DISTORTION REQUIREMENT The optical receiver should operate within specification of distortion requirement according to the table below: Composite Triple Beat dB - - -58 60 channels; Measured at 543.25MHz Optical power@- 10dBm Composite Second Order distortion dB - - -58 Noise carrier rating dB 43 - - 2.5 OPTICAL PERFORMANCE SPECIFICATION See the table below: Parameter λ1 1530 1550 1570 nm Optical Wavelength Range R 0.90 0.95 - A/W Op=0dBm ， λ=1550nm Responsivity Id - 0.3 0.5 nA Dark Current IL - - 0.7 dB Insert Loss ORL - - - dB Return loss - 45 - λ=1550nm λ=1550nm Optical Connector - SC - Green Green 3. ENVIRONMENTAL SPECIFICATION 3.1 TEMPERATURE The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below 3.1.1 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Unit Min Typ Max Note Optical Input Power Pin dBm - - +2.0 Levels above max range may result in (latent) damages to the machine Storage Temperature T-storage ºC -40 - +85 10 ... 95 % relative humidity; non-condensing 3.1.2 OPERATING ENVIRONMENTAL LIMITS Parameter Symbol Unit Min Typ Max Note Case Temperature T-case ºC 0 - +80 10 ... 80 % relative humidity; non-condensing Power Supply Voltage VPSU V 4.8 5.0 5.2 Power Consumption PPSU W - 0.6 1 VB=5V FTTH-F01 RF SPECIFICATIONS: Parameter Symbol Unit Min Typ Max Note RF passband FPB MHz - 75 - Minimum BW; RF output impedance Rimp_out Ω - - - AGC working range for optical input power Rimp_out dBm -15 - -5 Optical AGC will be implemented,the average optical input power controls the gain. RF output level RFout dBµV 70 72 73 Optical power input range in --5dBm~-15dBm Flatness Flatness dB - ±1 47~1000MHz Output Return Loss ORL dB - - -14 Modulation Error Ratio MER dB 33 - -  - Total 96channels input ,OMI=3.5%,Optical power@-15dBm Bit Error Ratio BER dB 1e-8 CNR CNR dB 43 60 channels; Measured at 543.25MHz Optical power@-10dBm CSO CSO dBc - - -58 CTB CTB dBc - - -58 Total current consumption(DC) Itot mA 130 - 170 VB=5V If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMO-P26 CATV Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

SMG3302R.PDF FEATURES ● Si active devices ● Power gain @30dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG3302R is a hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 10 MHz to 300MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 5 to 300MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Power Gain 29.5 - - 31 f=10MHZ Power Gain - 30.5 - f=300MHZ Slope cable equivalent -0.5 - - +0.5 f=10 to 300MHZ Flatness of frequency response - - - ±0.5 f=10to 300MHZ Input Return Loss - - - -18 f=10 to 300MHZ Output Return Loss - - - -18 f=10to 300MHZ Composite Triple Beat - - - -66 17channels flat; Vo=50dBmV; Composite Second Order distortion - - - -65 Cross Modulation - - - -60 Noise Figure - 4.3 - - f=200 MHZ Total Current Consumption 130 160 - - VB=+24V The module normally operates at VB=24 V(±0.5), If you want to know more about our product detairs,Please reply to get E-Catelog and FOC samples,Thank you.

SMO-P16.PDF FEATURES ● CATV 1GHz RF frequency bandwidth. ● Integrated WDM for GPON OLT wavelength bypass (1490/1310nm). ● Automatic gain control (AGC) of RF output level. ● Compact integrated mechanical housing. ● Module design and Plug & Play function. ● DC power on indication LED. ● AC/DC 12V power adaptor(standard)   DESCRIPTION SMO-P16 Optical Receiver is a high performance 1GHz CATV optical receiver for converting TV signal from optical fiber network into RF signal over coax cabling in residential homes. This product features compact size, high CNR, low distortion, low power consumption, easy installation and cost effectiveness. It supports conventional analog TV RF as well as Digital Video Broadcasting signals. RF output level can be adjusted with manual gain control. The SMO-P16 is the best choice to be used on FTTH services. It has WDM devices integrated for combing GPON (IP) signals of wavelengths 1310nm (upstream) & 1490nm (downstream) with 1550nm CATV signal in the same fiber.

Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node