Download product specification:SMO30A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● OP-AG   DESCRIPTION The SMO30A CATV Optical Receivers has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at –7~+1dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310 FL Flatness straight line dB - - - f=40 to 870 MHZ Vo Output voltage dBμV 77 - 79 85 channels flat; f=543.25MHz Optical power receiving at –7~+1dBm CTB Composite triple beat dB - - -63 85 channels flat; measured at 543.25 MHz; Optical power receiving at –7~+1dBm CSO Composite second order distortion dB - - -60 CNR Carrier to noise ratio dB - 51 - S22 Output return loss dB 12 - - Optical power receiving at -1dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total current consumption(DC) mA 5 - 20 VB1=12V mA 150 - 180 VB2=5V The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO33A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● RF-AGC   DESCRIPTION  The SMO33A CATV Optical Receiver Module has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 12V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at–8~+2dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310nm FL Flatness straight line dB - - ±0.6 f=40 to 870 MHZ Vo Output voltage dBμV - 79 - 60~85channels flat; Optical power receiving at –8~+2dBm CTB①/② Composite triple beat dB - - -67/- 64 60 channels flat; measured at 543.25 MHz; Optical power receiving at –8~+2dBm CSO①/② Composite second order distortion dB - - -63/- 61 CNR Carrier to noise ratio dB - 50 - S22 Output return loss dB 12 - - Optical power receiving at -1 dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total Current Consumption mA 130 - 150 VB=12V ①Optical power at －8dBm；②Optical power at +2dBm 。 The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SMO-P16.PDF FEATURES ● CATV 1GHz RF frequency bandwidth. ● Integrated WDM for GPON OLT wavelength bypass (1490/1310nm). ● Automatic gain control (AGC) of RF output level. ● Compact integrated mechanical housing. ● Module design and Plug & Play function. ● DC power on indication LED. ● AC/DC 12V power adaptor(standard)   DESCRIPTION SMO-P16 Optical Receiver is a high performance 1GHz CATV optical receiver for converting TV signal from optical fiber network into RF signal over coax cabling in residential homes. This product features compact size, high CNR, low distortion, low power consumption, easy installation and cost effectiveness. It supports conventional analog TV RF as well as Digital Video Broadcasting signals. RF output level can be adjusted with manual gain control. The SMO-P16 is the best choice to be used on FTTH services. It has WDM devices integrated for combing GPON (IP) signals of wavelengths 1310nm (upstream) & 1490nm (downstream) with 1550nm CATV signal in the same fiber.

Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node

Applications: ● Repeater ● FTTH(G-PON,GE-PON) ● CATV

SMF8346S.PDF FEATURES ● Superior Return Loss Performance ● Extremely Low Distortion ● Excellent Linearity ● Low Noise   ● Optimal Reliability     DESCRIPTION The SMF8346S is a Push Pull amplifier module. The part employs Si dies and is operated from 40MHz to 860MHz with supply voltage +6V(DC). CHARACTERISTICS (Bandwidth 40 to 860MHZ; Tmb＝25℃, VB＝6V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 33.5 34 35 f=50MHZ SL Slope cable equivalent dB 1 2 3 f=40 to 860 MHZ FL Flatness of frequency response dB - - ±0.5 f=40 to 860 MHZ S11 Input Return Loss dB - - -16 f=40 to 860 MHZ S22 Output Return Loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -50 60 channels flat; Vo=42dBmV; CSO Composite Second Order Distortion dB - - -50 CTB measured at 543.25 MHz; Xmod Cross Modulation dB - - -51 CSO measured at 544.5 MHz; Vo Output Voltage dBmV 58 - - dim=-60dB F Noise Figure dB - - 7.5 f=860 MHZ Itot Total Current Consumption mA 340 - 370 VB=+6V The module normally operates at VB=6 V(±0.5)

SMG1025.PDF FEATURES ● GaAs active devices ● Power gain @25dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1025 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 25 - 26.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1000 MHZ S11＆S22 Input ＆output return loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -14 f=861 to 1000 MHZ CSO Composite Second Order distortion dB - - -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; Xmod Cross Modulation dB - - -63 Vo Output Voltage dBmV 60 - -55 F Noise Figure dB - 4.0 - f=860 MHZ Itot Total Current Consumption mA 250 330 - VB=+24V The module normally operates at VB=24 V(±0.5)