Download product specification:SMO33A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● RF-AGC   DESCRIPTION  The SMO33A CATV Optical Receiver Module has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 12V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at–8~+2dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310nm FL Flatness straight line dB - - ±0.6 f=40 to 870 MHZ Vo Output voltage dBμV - 79 - 60~85channels flat; Optical power receiving at –8~+2dBm CTB①/② Composite triple beat dB - - -67/- 64 60 channels flat; measured at 543.25 MHz; Optical power receiving at –8~+2dBm CSO①/② Composite second order distortion dB - - -63/- 61 CNR Carrier to noise ratio dB - 50 - S22 Output return loss dB 12 - - Optical power receiving at -1 dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total Current Consumption mA 130 - 150 VB=12V ①Optical power at －8dBm；②Optical power at +2dBm 。 The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO-P15.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Switch CATV on/off ● PWDM ● AGC   DESCRIPTION P15 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -15~-5dBm. Small size which can be assembled in a small case. The output RF can be switched by I2C control. CHARACTERISTICS (Bandwidth 45 to 900MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S responsively V/W 0.9 - - λ=1550nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 900 MHZ, wide band flatness FL2 Flatness of frequency dB 0 2.0 ±0.4 Narrow bandwidth per 7MHz SL Slope dB - - 4.0 f=45 to 900 MHZ S22 Output Return Loss dB - - -12 f=45 to 900 MHZ Itot Total Current Consumption mA 240 - 270 VB=5V Automatic Gain Control Receiving Power: -15-5dBm (According to customer requirements) Vo1 Output Voltage dBuV 73 75 77 Popt= -15~-5dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel CTB Composite Triple Beat dB - - -57 Optical power- 0dBm 42channels PAL-D.176.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -57 C- spurious Carrier to spurious dB 44 - - CNR Noise carrier rating dB 44 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel

SMG1025DM.PDF FEATURES ● GaAs active devices ● Power gain @25dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1025DM is a GaAs hybrid power double amplifier module. The part employs GaAs dies and is operated from 50MHz to 1003MHz with supply +24V( DC). CHARACTERISTICS (Bandwidth 50 to 1003MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 23.5 - 24.5 f=50MHZ Gp Power Gain dB - 25 - f=1003MHZ SL Slope cable equivalent dB 1.0 - 2.5 f=50 to 1003 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1003 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -16 f=50 to 860 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -15 f=861 to 1003 MHZ CTB Composite Triple Beat dB - - -60 99channels flat; Vo=48dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -63 Xmod Cross Modulation dB - - -60 Vo Output Voltage dBmV 60 - - dim=-60dB F Noise Figure dB - -4.0 - f=860 MHZ Itot Total Current Consumption mA 330 - 400 VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.