Download product specification :SMO1205A.PDF FEATURES ● Excellent linearity ● Extremely low noise ● Excellent flatness ● Rugged construction ● FC/APC ● AG   DESCRIPTION SMO1025A AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry make output level stably when in the range of -10~0dBm. Small size with FC/APC connector which can be assembled in a small case.  

Download product specification：HP80A-8.PDF  FEATURES ● Excellent linearity ● Extremely low noise ● Excellent flatness ● Standard CATV outline ● Rugged construction ● FC/APC SC/APC ● AGC   DESCRIPTION The HP80A-8AGC CATV Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) . The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - ±0.75 λ=1300nm-1600nm FL Flatness of frequency response dB - - 81 f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 -63 Popt= -8 ~ +2dBm CTB Composite Triple Beat dB - - - 60 channels flat; measured at 543.25 MHz; Optical power receiving at–1dBm CSO Composite Second Order distortion dB - 50 - CNR Noise carraier rating dB - - - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption dB 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details, Please reply to get E-catalog and FOC samples, thank you.

Download product specification:SMO30A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● OP-AG   DESCRIPTION The SMO30A CATV Optical Receivers has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at –7~+1dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310 FL Flatness straight line dB - - - f=40 to 870 MHZ Vo Output voltage dBμV 77 - 79 85 channels flat; f=543.25MHz Optical power receiving at –7~+1dBm CTB Composite triple beat dB - - -63 85 channels flat; measured at 543.25 MHz; Optical power receiving at –7~+1dBm CSO Composite second order distortion dB - - -60 CNR Carrier to noise ratio dB - 51 - S22 Output return loss dB 12 - - Optical power receiving at -1dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total current consumption(DC) mA 5 - 20 VB1=12V mA 150 - 180 VB2=5V The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO33A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● RF-AGC   DESCRIPTION  The SMO33A CATV Optical Receiver Module has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 12V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at–8~+2dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310nm FL Flatness straight line dB - - ±0.6 f=40 to 870 MHZ Vo Output voltage dBμV - 79 - 60~85channels flat; Optical power receiving at –8~+2dBm CTB①/② Composite triple beat dB - - -67/- 64 60 channels flat; measured at 543.25 MHz; Optical power receiving at –8~+2dBm CSO①/② Composite second order distortion dB - - -63/- 61 CNR Carrier to noise ratio dB - 50 - S22 Output return loss dB 12 - - Optical power receiving at -1 dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total Current Consumption mA 130 - 150 VB=12V ①Optical power at －8dBm；②Optical power at +2dBm 。 The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO105A-DDM.PDF FEATURES ● The Optical Input controlled in the range of - 8dBm to +2dBm ● Single +5V Supply ● Extremely low nois ● Bandwidth 1000MH ● Monitor the temperature of high precisio ● Can control the RF signal closing and opening ● FC/APC SC/APC   DESCRIPTION The SMO105A-DDM AGC Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) .The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - - λ=1300nm-1600nm FL Flatness of frequency response dB - ±0.75 - f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 81 Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat dB - - -62 Test at Optical input Power –1dBm.84 PAL-D channels DS22,OMI=3.5%per channel CSO Composite Second Order distortion dB - - -61 CNR Noise carraier rating dB - 50 - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption mA 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification：SMO2700.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged construction ● FC/APC ● AG   DESCRIPTION SMO2700 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. Output level is 70dBuV @-5dBm. Small size with FC/APC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP MAX. CONDITIONS S responsively V/W 850 - - λ=1300nm-1600nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - - ±0.4 Narrow bandwidth per 7MHz SL Slope dB - 2 3 From 45~900MHz S22 Output Return Loss dB - - - f=45 to 900 MHZ S22 Output Return Loss dB - - - f=1000 to 2700 MHZ Itot Total Current Consumption mA - - 220 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 70 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=25℃ OMI=4% per channel - - - - - - Vo1 Output Voltage dBuV 68 - - - - Popt= -5dBm BW=45~900MHz 42 channels T=0~40℃ OMI=4% per channel - 80.5 - - - SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -57 CTB Composite Triple Beat dB - - -57 Optical power +1dBm 42 channels PAL-D .175.25MHz OMI=4% per channel  CSO Composite Second Order distortion dB - - -56 C- spurious Carrier to spurious dB - - -56 CNR Noise carrier rating dB 45 - - Optical power -7dBm 42 channels PAL-D .175.25MHz OMI=4% per channel - - - - Please note:  Vo1 are according to the optical change from -10dBm ~0dBm. For example, In -10dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO-P15.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Switch CATV on/off ● PWDM ● AGC   DESCRIPTION P15 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -15~-5dBm. Small size which can be assembled in a small case. The output RF can be switched by I2C control. CHARACTERISTICS (Bandwidth 45 to 900MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S responsively V/W 0.9 - - λ=1550nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 900 MHZ, wide band flatness FL2 Flatness of frequency dB 0 2.0 ±0.4 Narrow bandwidth per 7MHz SL Slope dB - - 4.0 f=45 to 900 MHZ S22 Output Return Loss dB - - -12 f=45 to 900 MHZ Itot Total Current Consumption mA 240 - 270 VB=5V Automatic Gain Control Receiving Power: -15-5dBm (According to customer requirements) Vo1 Output Voltage dBuV 73 75 77 Popt= -15~-5dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel CTB Composite Triple Beat dB - - -57 Optical power- 0dBm 42channels PAL-D.176.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -57 C- spurious Carrier to spurious dB 44 - - CNR Noise carrier rating dB 44 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel

Download product specification:SMOP23.PDF FEATURES ● Excellent linearity  ● Extremely low noise  ● Excellent flatness  ● Rugged construction  ● PWDM ● AGC DESCRIPTION SMOP23 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry make output level stably when in the range of -10~0dBm. Small size which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS responsively V/W 0.9 - - λ=1550nm Flatness of frequency response dB - ±1.0 ±0.5 f=45 to 1000 MHZ, wide band flatness Flatness of frequency dB - - ±0.4 Narrow bandwidth per 7MHz Slope dB 0 2.0 4.0 From 45~1000MHz Output Return Loss dB -14 - - f=45 to 1000 MHZ Total Current Consumption mA 310 - 350 VB=5V Automatic Gain Control Receiving Power: -10~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 78 81 83 Popt= -10~0dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel Vo1 Output Voltage dBuV 77 80 82 Popt= -10~0dBm @176.25MHz 42 channels T=-20℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power/ 0dBm 42chanels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -62 Optical power- 1dBm 42channels PAL-D.175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CNR Noise carrier rating dB 46 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function   DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note:  Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV.  Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.