SMG1025DM/CATV GaAs Power Double Module

SMG1027DM.PDF FEATURES ● GaAs active devices ● Power gain @27dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cos   DESCRIPTION The SMG1027DM is a GaAs hybrid power double amplifier module. The part employs GaAs dies and is operated from 50MHz to1003MHz with supply voltage +24V( DC). CHARACTERISTICS (Bandwidth 50 to 1003MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 25.5 - 26.5 f=50MHZ Gp Power Gain dB - 27.5 - f=1003MHZ SL Slope cable equivalent dB 1.0 - 2.0 f=50 to 1003 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1003 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -16 f=50 to 860 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -12 f=861 to 1003MHZ CTB Composite Triple Beat dB - - -60 99channels flat; Vo=48dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -63 Xmod Cross Modulation dB - - -53 Vo Output Voltage dBmV 60 - - dim=-60dB F Noise Figure dB - -4.0 - f=860 MHZ Itot Total Current Consumption mA 330 - 400 VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more our product details,Please reply  to get E-Catelog and FOC samples,Thank you.

SMG1034DM.PDF FEATURES ●GaAs active devices ● Power gain @34dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability side view ● Low cost   DESCRIPTION The SMG1034DM is a GaAs hybrid power double amplifier module. The part employs GaAs dies and is operated from 50MHz to1003MHz with supply voltage +24V( DC).

Download product specification:SMO3035.PDF FEATURES ● Excellent Linearit ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● FC/APC SC/APC   DESCRIPTION The SMO3035 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 3.5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; T mb＝25℃, VB＝3.5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310±20nm S Responsivity V/W 950 - - λ=1550±20nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 90 - 60 channels flat; OMI=3.5% measured at 543.25 MHz; Optical power receiving at 0dBm CTB Composite triple beat dB 70 - - CSO Composite second order distortion dB 65 - - CNR Carrier to noise ratio dB 50 - - S22 Output return loss dB -11 - - f=40 to 870 MHZ Itot Total current consumption mA 70 - 100 VB=3.5V The module normally operates at VB=3.5 V(±0.5)

SMO-P29 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node

SDU-RFoG-F01.PDF Product Description： The SDU RFoG F series is mainly used for RFoG network. “OBI-Free” R-ONU eliminate the Optical Beat Interferences(OBI) that has been an issue in the traditional RFoG deployments. Its return path laser can work in burst mode.The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features： 1) Support downstream optical AGC, The control range is -6~+2dBm; 2) Burst mode is supported； 3) OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input; 4) 0.2nm as one step, and the automatic control of transmitting wavelength can be reached by the temperature change randomly.

Download product specification:SMO30A.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● FC/APC SC/APC ● OP-AG   DESCRIPTION The SMO30A CATV Optical Receivers has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. optical power receiving at –7~+1dBm. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310 FL Flatness straight line dB - - - f=40 to 870 MHZ Vo Output voltage dBμV 77 - 79 85 channels flat; f=543.25MHz Optical power receiving at –7~+1dBm CTB Composite triple beat dB - - -63 85 channels flat; measured at 543.25 MHz; Optical power receiving at –7~+1dBm CSO Composite second order distortion dB - - -60 CNR Carrier to noise ratio dB - 51 - S22 Output return loss dB 12 - - Optical power receiving at -1dBm Sλ Spectral sensitivity A/W 0.85 - - f=40 to 870 MHZ A/W 0.9 - - λ=1310±20nm λ Optical wavelengh nm 1290 - 1600 Itot Total current consumption(DC) mA 5 - 20 VB1=12V mA 150 - 180 VB2=5V The module normally operates at VB=5 V(±0.1) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Major Applications • LNA for cellular infrastructure and other ultra low noise application.