Products

Mini V-ONU F01/CATV Optical Receiver

Brand:
Sanland
Item NO.:
Mini V-ONU F01/CATV
Payment:
TT/LC
Product Origin:
Shenzhen
Lead Time：
According to Order Quanlity
Weight：
200

Inquiry now

Product Detail

1. SCOPE

This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.

2. ELECTRICAL SEPCIFICATION

2.1 INPUTRANGE

2.1.1 OPTICAL INPUTRANGE
Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE
Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.

2.2 OUTPUT LEVEL
The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.

2.3 ESD SENSITIVITY

The optical receiver should operate within specification of ESD sensitivity according to the table below:

ESD

ESD sensitivity

Human body model;

R=1.5KΩ;C=100pF

MAX=500

2.4 RF PERFORMANCE REQUIRMENT

2.4.1 BANDWIDTH
The optical receiver should operate within specification of band width from 47MHz to 1000MHz

2.4.2 OUTPUT RETURNLOSS
The exact output return loss should apply the specification that S22 ≦-14dB

2.4.3 DISTORTION REQUIREMENT
The optical receiver should operate within specification of distortion requirement according to the table below:

Composite Triple Beat	dB	-	-	-58	60 channels; Measured at 543.25MHz Optical power@- 10dBm
Composite Second Order distortion	dB	-	-	-58
Noise carrier rating	dB	43	-	-

2.5 OPTICAL PERFORMANCE SPECIFICATION
See the table below:

Parameter	λ1	1530	1550	1570	nm
Optical Wavelength Range	R	0.90	0.95	-	A/W	Op=0dBm ， λ=1550nm
Responsivity	Id	-	0.3	0.5	nA
Dark Current	IL	-	-	0.7	dB
Insert Loss	ORL	-	-	-	dB
Return loss		-	45	-	λ=1550nm	λ=1550nm
Optical Connector		-	SC	-	Green	Green

3. ENVIRONMENTAL SPECIFICATION

3.1 TEMPERATURE
The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below

3.1.1 ABSOLUTE MAXIMUM RATINGS

Parameter	Symbol	Unit	Min	Typ	Max	Note
Optical Input Power	Pin	dBm	-	-	+2.0	Levels above max range may result in (latent) damages to the machine
Storage Temperature	T-storage	ºC	-40	-	+85	10 ... 95 % relative humidity; non-condensing

3.1.2 OPERATING ENVIRONMENTAL LIMITS

Parameter	Symbol	Unit	Min	Typ	Max	Note
Case Temperature	T-case	ºC	0	-	+80	10 ... 80 % relative humidity; non-condensing
Power Supply Voltage	VPSU	V	4.8	5.0	5.2
Power Consumption	PPSU	W	-	0.6	1	VB=5V

FTTH-F01 RF SPECIFICATIONS:

Parameter	Symbol	Unit	Min	Typ	Max	Note
RF passband	FPB	MHz	-	75	-	Minimum BW;
RF output impedance	Rimp_out	Ω	-	-	-
AGC working range for optical input power	Rimp_out	dBm	-15	-	-5	Optical AGC will be implemented,the average optical input power controls the gain.
RF output level	RFout	dBµV	70	72	73	Optical power input range in --5dBm~-15dBm
Flatness	Flatness	dB	-	±1		47~1000MHz
Output Return Loss	ORL	dB	-	-	-14	47~1000MHz
Modulation Error Ratio	MER	dB	33	-	-	- Total 96channels input ,OMI=3.5%,Optical power@-15dBm
Bit Error Ratio	BER	dB			1e-8	- Total 96channels input ,OMI=3.5%,Optical power@-15dBm
CNR	CNR	dB	43			60 channels; Measured at 543.25MHz Optical power@-10dBm
CSO	CSO	dBc	-	-	-58
CTB	CTB	dBc	-	-	-58
Total current consumption(DC)	Itot	mA	130	-	170	VB=5V

If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Related Tags :

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Mini V-ONU F01/CATV Optical Receiver

Submit

Categories

how can we help you

You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.

New Products

Related Products

catv FTTH,optical receiver catv,ftth receiver

SMO-P25/CATV Optical Receiver Module

SMO-P25 CATV Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

view detail

catv optical module,fm amplifier broadcasting,mini node

SMO-P27/CATV Optical Receiver

SMO-P27 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

view detail

optical receiver catv,ftth catv,CATV Hybrid

SMO-P26/CATV Optical Receiver Module

SMO-P26 CATV Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

view detail

FTTH optical module,rf power amplifier,optical node ic

SMO-P28/CATV Optical Receiver

SMO-P28 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0d.

view detail

SMO-P29/CATV Optical Receiver

SMO-P29 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.

view detail

SMG1029/CATV GaAs Pull Module

SMG1029.PDF FEATURES ● GaAs active devices ● Power gain @29dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost DESCRIPTION The SMG1029 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC). GaAs Push-pull Module CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 29 - 30.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1000 MHZ S11＆S22 Input ＆output return loss dB - - -16 f=50 to 860 MHZ Composite Triple Beat dB - - -14 f=861 to 1000 MHZ CTB Composite Second Order distortion dB - - -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Cross Modulation dB - - -63 Xmod Output Voltage dB - - -55 Vo Noise Figure dBmV 60 - - dim=-60dB F Total Current Consumption dB - 4.0 - f=860 MHZ Itot Total Current Consumption mA 250 330 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more our product details,Please replay to get E-Catelog and FOC samples,Thank you.

view detail

SMO-P22 AGC Optical Receiver Module

Download product specification:SMO-P22.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Rugged constructio ● FC/APC ● AGC&WDM function DESCRIPTION SMO-P22 AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC circuitry inside which make output level stably when in the range of -10~0dBm. Small size with FC connector which can be assembled in a small case. CHARACTERISTICS (Bandwidth 45 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively A/W 0.85 λ=1550nm FL Flatness of frequency response dB ±1.0 f=47 to 1000 MHZ VO RF Output Voltage dBmV 80 81±1 83 Optical power input range in -10dBm ~ 0dBm OMI Optical modulation Index Ch% 4.0 △S Optical return loss dB 45 Optical fiber connector Typical of optical connector ( green Color) FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 1000 MHZ, wide band flatness FL2 Flatness of frequency response dB - ±0.4 Narrow bandwidth per 7MHz SL Slope dB 0 1.5 3 From 45~1000MHz S22 Output Return Loss dB -12 - - f=45 to 870 MHZ S22 Output Return Loss dB -12 - - f=871 to 1000 MHZ Automatic Gain Control Receiving Power: -8~0dBm (According to customer requirements) Vo1 Output Voltage dBuV 80 83 Popt= -10~0dBm BW=45~1000MHz 42 channels T=25℃ OMI=4% per channe Vo2 Output Voltage dBuV 80 83.5 Popt= -10~0dBm BW=45~1000MHz 42 channels T=0~40℃ OMI=4% per channel CTB Composite Triple Beat dB - - -60 Optical power -3dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 CTB Composite Triple Beat dB - - -60 Optical power -8dBm 42 channels PAL-D .175.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -60 C-spurious Carrier to spurious dB - - -60 Please note: Vo1 are according to the optical change from -8dBm ~0dBm. For example, In -8dBm the output level is 80dBuV, but in the 0dBm maybe output level is 82dBuV. Vo2 are according to the temperature change .for example: when the temperature stay 40℃,the output level will lower 0.5dB than 25℃. When the temperature stay 0℃,the output level will higher 0.5dB than 25℃. If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

view detail