MMIC-AVG1009/0.05-1.0 GHz Optical Node RF Amplifier

SDU RFoG D024 datasheet FEATURES l 1.AGC controlled receiver with -6 to +2dBm optical input range. 2.18 dBmV RF output level for single subscriber (SDU) applications. 3.Burst mode is supported 4.Input optical level test points (1V/mW) 5.54/87/105/258–1218MHz forward on 1550 nm and 5–42/65/85/204MHz return on 1610 nm wavelengths. 6.1610nm DFB laser transmitter supports full DOCSIS® 3.0 operation. 7.DC power supported via RF port or dedicated power port. 8.10/10, 10/1, 2/1, 1/1Gbps PON pass-through and no PON pass-through options.     PRODUCT OVERVIEW The SANLAND SDU RFoG D02 Optical Network Unit (R-ONU) for Single Dwelling Unit (SDU)applications support cost-effective deployment of full interactive video, voice, and data services over an RFoG network. SDU RFoG D02 enables multiple simultaneous upstream RF channel transmissions, enabling multiple MAC domains and full DOCSIS 3.0 channel usage to efficiently coexist. The 18 dBmV RF output with AGC (Automatic Gain Control) supports a wide array of SDU designs, with a 5–42/65/85/204MHz return path using 1610 nm wavelength optics and a 54/87/105/258–1218MHz forward path on 1550 nm wavelength optics.

Download product specification:SMO3035.PDF FEATURES ● Excellent Linearit ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● FC/APC SC/APC   DESCRIPTION The SMO3035 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 3.5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; T mb＝25℃, VB＝3.5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310±20nm S Responsivity V/W 950 - - λ=1550±20nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 90 - 60 channels flat; OMI=3.5% measured at 543.25 MHz; Optical power receiving at 0dBm CTB Composite triple beat dB 70 - - CSO Composite second order distortion dB 65 - - CNR Carrier to noise ratio dB 50 - - S22 Output return loss dB -11 - - f=40 to 870 MHZ Itot Total current consumption mA 70 - 100 VB=3.5V The module normally operates at VB=3.5 V(±0.5)

SDU-RFoG-F01.PDF Product Description： The SDU RFoG F series is mainly used for RFoG network. “OBI-Free” R-ONU eliminate the Optical Beat Interferences(OBI) that has been an issue in the traditional RFoG deployments. Its return path laser can work in burst mode.The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features： 1) Support downstream optical AGC, The control range is -6~+2dBm; 2) Burst mode is supported； 3) OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input; 4) 0.2nm as one step, and the automatic control of transmitting wavelength can be reached by the temperature change randomly.

SMO-P16.PDF FEATURES ● CATV 1GHz RF frequency bandwidth. ● Integrated WDM for GPON OLT wavelength bypass (1490/1310nm). ● Automatic gain control (AGC) of RF output level. ● Compact integrated mechanical housing. ● Module design and Plug & Play function. ● DC power on indication LED. ● AC/DC 12V power adaptor(standard)   DESCRIPTION SMO-P16 Optical Receiver is a high performance 1GHz CATV optical receiver for converting TV signal from optical fiber network into RF signal over coax cabling in residential homes. This product features compact size, high CNR, low distortion, low power consumption, easy installation and cost effectiveness. It supports conventional analog TV RF as well as Digital Video Broadcasting signals. RF output level can be adjusted with manual gain control. The SMO-P16 is the best choice to be used on FTTH services. It has WDM devices integrated for combing GPON (IP) signals of wavelengths 1310nm (upstream) & 1490nm (downstream) with 1550nm CATV signal in the same fiber.

SMG3242R.PDF FEATURES ● Si active devices ● Power gain @24.5dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG3242R is a hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 10 MHz to 300MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 5 to 300MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 24 - 25 f=10MHZ Gp Power Gain dB - 24.5 - f=300MHZ SL Slope cable equivalent dB -0.5 - +0.5 f=10 to 300MHZ FL Flatness of frequency response dB - - ±0.5 f=10 to 300MHZ S11 Input Return Loss dB - - -20 f=10 to 300MHZ S22 Output Return Loss dB - - -20 f=10to 300MHZ CTB Composite Triple Beat dB - - -66 17channels flat; Vo=50dBmV; CSO Composite Second Order distortion dB - - -65 Xmod Cross Modulation dB - - -60 F Noise Figure dB - 4.3 - f=200 MHZ Itot Total Current Consumption mA 130 160 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more about our product detais,Plese reply to get E-Catelog and FOC samples,Thank you.

SMG1022.PFD FEATURES ● GaAs active devices ● Power gain @22dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1022 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC). CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 25 26.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB ±0.5 f=50 to 1000 MHZ S11＆S22 Input ＆output return loss dB -16 f=50 to 860 MHZ dB -14 f=861 to 1000 MHZ CTB Composite Triple Beat dB -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB -63 Xmod Cross Modulation dB -55 Vo Output Voltage dBmV 60 dim=-60dB F Noise Figure dB 4.0 f=860 MHZ Itot Total Current Consumption mA 250 330 VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more our product details,Please reply to get E-Catelog and FOC samples,thank you.

SDU RFoG F02 datasheet FEATURES  1.Standards compliant OBI‐free technology enables high performance upstream operation in an RFoG environment. 2.19 dBmV RF output level for single subscriber (SDU) applications. 3.Burst mode is supported. 4.OBI-Free technology on this model supports up to 16 R-ONUs transmitting into a single optical input. 5.54/87/105/258–1218MHz forward on 1550 nm and 5–42/65/85/204MHz return on 1610 nm wavelengths. 6.1610nm DFB laser transmitter supports full DOCSIS® 3.0 operation. 7.DC power supported via RF port or dedicated power port. 8.10/10, 10/1, 2/1, 1/1Gbps PON pass-through and no PON pass-through options.   PRODUCT OVERVIEW The SANLAND SDU RFoG F02 Optical Network Unit (R-ONU) for Single Dwelling Unit (SDU)applications support cost-effective deployment of full interactive video, voice, and data services over an RFoG network.SDU RFoG F02 enables multiple simultaneous upstream RF channel transmissions, enabling multiple MAC domains and full DOCSIS 3.0 channel usage to efficiently coexist, offering increased upstream bandwidth usage for RF returns as compared to non-OBI-free models. The 19 dBmV RF output with AGC (Automatic Gain Control) supports a wide array of SDU designs, with a 5–42/65/85/204MHz return path using 1610 nm wavelength optics and a 54/87/105/258–1218MHz forward path on 1550 nm wavelength optics.  

SMG6342.PDF FEATURES ●GaAs active devices ● Power gain @34dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability side view ● Low cost   DESCRIPTION The SMG6342 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50MHz to 550MHz with supply.  CHARACTERISTICS (Bandwidth 50 to 550MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 33.5 - 34.5 f=50MHZ Gp Power Gain dB - 35 - f=550MHZ SL Slope cable equivalent dB - - 2.0 f=50 to 550 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 550 MHZ S11 Input Return Loss dB - - -16 f=50 to 550 MHZ S22 Output Return Loss dB - - -16 f=50 to 550 MHZ CTB Composite Triple Beat dB - - -62 PAL60channelsflat; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -63 Xmod Cross Modulation dB - - -55 Vo Output Voltage dBmV 60 - - dim=-60dB F Noise Figure dB - -4.0 - f=860 MHZ Itot Total Current Consumption mA 260 310 - VB=+24V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.