SMG1025PM/CATV GaAs Push-pull Module

SMG1027PM.PDF FEATURES ● GaAs active devices ● Power gain @27dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1027PM is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1003MHz with supply voltage +24V(DC). 

SMG1034PM.PDF FEATURES ● GaAs active devices ● Power gain @34dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1034PM is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1003MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 50 to 1003MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 32.5 33.5 34 f=50MHZ Gp Power Gain dB 35.0 36 37 f=1003MHZ SL Slope cable equivalent dB 1.0 2.0 3 f=50 to 1003 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1003 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -16 f=50 to 860 MHZ S11 ＆ S22 Input/Output Return Loss dB - - -12 f=861 to 1003 MHZ CTB Composite Triple Beat dB - - -66 99channels flat; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; CSO Composite Second Order distortion dB - - -65 Xmod Cross Modulation dB - - -61 Vo Output Voltage dBmV - - - dim=-60dB F Noise Figure dB - 5.0 6.2 f=860 MHZ Itot Total Current Consumption mA 270 340 - VB=+24V The module normally operates at VB=24 V(±0.5) If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

AGC1011.PDF Product Features ● 40-1000MHz operating frequency range. ● High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch. ● 41dB Gain at 55MHz；41.5dB Gain at 1000MHz ● High dynamic gain range, 24dB Gain Control Range, Support 12dBm optical range. ● Single supply, Single +5V Sup ● Low power consumption, 180mA for one RF output at 5V supply voltage. ● Lead-free/RoHS compliant QFN4X4－24L package. Product Performance (Ta=25℃) Symbol Parameter1 Units Frequency Min. Typ. Max. G Trans-Impedance (Max. Gain State) dB 0.05 GHz 0.87 GHz 1GHz - 41.0 41.0 41.5 - G Range Gain Control Range dB - 24 - P-1dB dBm 0.45GHz - 20.5 - OIP3 Output IP3 dBm 0.45GHz - 34 - RL Output Return Loss dB 0.05-1 GHz - -15 - IDD Attenuator Current mA VDD=+5V 160 180 200 1. All measurements in a 75 Ohm system, unless otherwise specified. 2. Specified at maximum gain. 3. When the control voltage is changed, the attenuation is changed, Attenuation gain deviation is ±1.5dB.

Major Applications •CATV Network •FTTH Network •PON ONU

Mini V-ONU F01.pdf 1. SCOPE This document describes basic electrical characteristics and mechanical characteristics of optical receiver FTTH-F01, which is produced in Shenzhen, PRC.  2. ELECTRICAL SEPCIFICATION 2.1 INPUTRANGE 2.1.1 OPTICAL INPUTRANGE Optical receiver FTTH-F01 should operate within specification of optical input range from -15dBm to -5dBm. 2.1.2 DC INPUTRANGE Optical receiver FTTH-F01 should operate within specification of DC input range from 4.8V to 5.2V.  2.2 OUTPUT LEVEL The optical receiver should operate within specification of output level from 70dBµV to 73dBµV with optical input range is from -15dBm to -5dBm.  2.3 ESD SENSITIVITY The optical receiver should operate within specification of ESD sensitivity according to the table below: ESD ESD sensitivity Human body model; R=1.5KΩ;C=100pF MAX=500 1 V 2.4 RF PERFORMANCE REQUIRMENT 2.4.1 BANDWIDTH The optical receiver should operate within specification of band width from 47MHz to 1000MHz 2.4.2 OUTPUT RETURNLOSS The exact output return loss should apply the specification that S22 ≦-14dB 2.4.3 DISTORTION REQUIREMENT The optical receiver should operate within specification of distortion requirement according to the table below: Composite Triple Beat dB - - -58 60 channels; Measured at 543.25MHz Optical power@- 10dBm Composite Second Order distortion dB - - -58 Noise carrier rating dB 43 - - 2.5 OPTICAL PERFORMANCE SPECIFICATION See the table below: Parameter λ1 1530 1550 1570 nm Optical Wavelength Range R 0.90 0.95 - A/W Op=0dBm ， λ=1550nm Responsivity Id - 0.3 0.5 nA Dark Current IL - - 0.7 dB Insert Loss ORL - - - dB Return loss - 45 - λ=1550nm λ=1550nm Optical Connector - SC - Green Green 3. ENVIRONMENTAL SPECIFICATION 3.1 TEMPERATURE The temperature include storage temperature and operating temperature, and the optical receiver should apply to the temperature specification as the table below 3.1.1 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Unit Min Typ Max Note Optical Input Power Pin dBm - - +2.0 Levels above max range may result in (latent) damages to the machine Storage Temperature T-storage ºC -40 - +85 10 ... 95 % relative humidity; non-condensing 3.1.2 OPERATING ENVIRONMENTAL LIMITS Parameter Symbol Unit Min Typ Max Note Case Temperature T-case ºC 0 - +80 10 ... 80 % relative humidity; non-condensing Power Supply Voltage VPSU V 4.8 5.0 5.2 Power Consumption PPSU W - 0.6 1 VB=5V FTTH-F01 RF SPECIFICATIONS: Parameter Symbol Unit Min Typ Max Note RF passband FPB MHz - 75 - Minimum BW; RF output impedance Rimp_out Ω - - - AGC working range for optical input power Rimp_out dBm -15 - -5 Optical AGC will be implemented,the average optical input power controls the gain. RF output level RFout dBµV 70 72 73 Optical power input range in --5dBm~-15dBm Flatness Flatness dB - ±1 47~1000MHz Output Return Loss ORL dB - - -14 Modulation Error Ratio MER dB 33 - -  - Total 96channels input ,OMI=3.5%,Optical power@-15dBm Bit Error Ratio BER dB 1e-8 CNR CNR dB 43 60 channels; Measured at 543.25MHz Optical power@-10dBm CSO CSO dBc - - -58 CTB CTB dBc - - -58 Total current consumption(DC) Itot mA 130 - 170 VB=5V If you want to know more our product details,Please reply to get E-Catelog and FOC samples,Thank you.

SD-OP101 V-ONU.PDF Description: The SD-OP101 V-ONU is a video optical receiver (V-ONU) for FTTH installed in the subscriber's home with a CATV system. It has the following features. (1) Optical receiver for video with a frequency band of 70 to 2681 MHz (8) Equipped with a new AGC function (2) BS (right-handed / left-handed), CS (right-handed) receivable Optical input range -14 to -4 dBm, RF output within ± 3 dB ③ With remote control function (band-specific control function) ④ Equipped with a tilt function to correct cable loss (CATV band approx. 6 dB) ⑤ The V-ONU main unit has a low current consumption of 180mA. ⑥ Power supply comes with coaxial power supply and coaxial superimposition power supply (built-in power inserter) ⑦ With an optical fiber extra length processing function, a fiber tray that can store two connection sleeves and one WDM filter.

SMF8346S.PDF FEATURES ● Superior Return Loss Performance ● Extremely Low Distortion ● Excellent Linearity ● Low Noise   ● Optimal Reliability     DESCRIPTION The SMF8346S is a Push Pull amplifier module. The part employs Si dies and is operated from 40MHz to 860MHz with supply voltage +6V(DC). CHARACTERISTICS (Bandwidth 40 to 860MHZ; Tmb＝25℃, VB＝6V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 33.5 34 35 f=50MHZ SL Slope cable equivalent dB 1 2 3 f=40 to 860 MHZ FL Flatness of frequency response dB - - ±0.5 f=40 to 860 MHZ S11 Input Return Loss dB - - -16 f=40 to 860 MHZ S22 Output Return Loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -50 60 channels flat; Vo=42dBmV; CSO Composite Second Order Distortion dB - - -50 CTB measured at 543.25 MHz; Xmod Cross Modulation dB - - -51 CSO measured at 544.5 MHz; Vo Output Voltage dBmV 58 - - dim=-60dB F Noise Figure dB - - 7.5 f=860 MHZ Itot Total Current Consumption mA 340 - 370 VB=+6V The module normally operates at VB=6 V(±0.5)

SMO-P29 CATV Optical Receiver is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -10~0dBm.