MMIC-SG102 mmic amplifier

AGC1011.PDF Product Features ● 40-1000MHz operating frequency range. ● High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch. ● 41dB Gain at 55MHz；41.5dB Gain at 1000MHz ● High dynamic gain range, 24dB Gain Control Range, Support 12dBm optical range. ● Single supply, Single +5V Sup ● Low power consumption, 180mA for one RF output at 5V supply voltage. ● Lead-free/RoHS compliant QFN4X4－24L package. Product Performance (Ta=25℃) Symbol Parameter1 Units Frequency Min. Typ. Max. G Trans-Impedance (Max. Gain State) dB 0.05 GHz 0.87 GHz 1GHz - 41.0 41.0 41.5 - G Range Gain Control Range dB - 24 - P-1dB dBm 0.45GHz - 20.5 - OIP3 Output IP3 dBm 0.45GHz - 34 - RL Output Return Loss dB 0.05-1 GHz - -15 - IDD Attenuator Current mA VDD=+5V 160 180 200 1. All measurements in a 75 Ohm system, unless otherwise specified. 2. Specified at maximum gain. 3. When the control voltage is changed, the attenuation is changed, Attenuation gain deviation is ±1.5dB.

SMG1027PM.PDF FEATURES ● GaAs active devices ● Power gain @27dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1027PM is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1003MHz with supply voltage +24V(DC). 

SMG1025.PDF FEATURES ● GaAs active devices ● Power gain @25dB ● Low distortion ● Excellent linear gain ● Low noise figure ● High reliability ● Low cost   DESCRIPTION The SMG1025 is a GaAs hybrid push-pull amplifier module. The part employs GaAs dies and is operated from 50 MHz to 1000MHz with supply voltage +24V(DC).  CHARACTERISTICS (Bandwidth 50 to 1000MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Gp Power Gain dB 25 - 26.5 f=50MHZ SL Slope cable equivalent dB 0.5 1.5 2.5 f=50 to 1000 MHZ FL Flatness of frequency response dB - - ±0.5 f=50 to 1000 MHZ S11＆S22 Input ＆output return loss dB - - -16 f=50 to 860 MHZ CTB Composite Triple Beat dB - - -14 f=861 to 1000 MHZ CSO Composite Second Order distortion dB - - -62 PAL 60 channel; Vo=44dBmV; CTB measured at 543.25 MHz; CSO measured at 544.5 MHz; Xmod Cross Modulation dB - - -63 Vo Output Voltage dBmV 60 - -55 F Noise Figure dB - 4.0 - f=860 MHZ Itot Total Current Consumption mA 250 330 - VB=+24V The module normally operates at VB=24 V(±0.5)

MDU RFoG F02 datesheet Product Description: The MDU RFoG series FTTB Node is mainly used for the RFoG network. “OBI-Free” R-ONU eliminates the Optical Beat Interference (OBI) that has been an issue in traditional RFoG deployments. Its return path laser can work in burst or continuous mode. The upstream output optical wavelength can be set as CWDM standard wavelength to shield the OBI effectively.   Features： 1) Support downstream optical AGC， whose control range is -6~0dBm； 2) Adopt electrically adjustable mode for both EQ and ATT circuit， using LED displaying screen to modify directly； 3) Upstream output optical wavelength is optional(or specified by the user). 4) Burst mode is supported； 5) OBI-Free technology on this model support up to 16 R-ONUs transmitting into a single optical input.

Major Applications •CATV Network •FTTH Network •PON ONU

Download product specification:SMO105A-DDM.PDF FEATURES ● The Optical Input controlled in the range of - 8dBm to +2dBm ● Single +5V Supply ● Extremely low nois ● Bandwidth 1000MH ● Monitor the temperature of high precisio ● Can control the RF signal closing and opening ● FC/APC SC/APC   DESCRIPTION The SMO105A-DDM AGC Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) .The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - - λ=1300nm-1600nm FL Flatness of frequency response dB - ±0.75 - f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 81 Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat dB - - -62 Test at Optical input Power –1dBm.84 PAL-D channels DS22,OMI=3.5%per channel CSO Composite Second Order distortion dB - - -61 CNR Noise carraier rating dB - 50 - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption mA 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.

Major Applications • LNA for cellular infrastructure and other ultra low noise application.

Download product specification:SMO-P15.PDF FEATURES ● Excellent Linearity ● Extremely low noise ● Excellent flatness ● Switch CATV on/off ● PWDM ● AGC   DESCRIPTION P15 CATV AGC Optical Receiver Module is a low power, but good performance optical receiver. AGC function make output level stably when in the range of -15~-5dBm. Small size which can be assembled in a small case. The output RF can be switched by I2C control. CHARACTERISTICS (Bandwidth 45 to 900MHZ; Tmb＝25℃, VB＝5V,ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S responsively V/W 0.9 - - λ=1550nm FL1 Flatness of frequency response dB - ±1.0 ±1.5 f=45 to 900 MHZ, wide band flatness FL2 Flatness of frequency dB 0 2.0 ±0.4 Narrow bandwidth per 7MHz SL Slope dB - - 4.0 f=45 to 900 MHZ S22 Output Return Loss dB - - -12 f=45 to 900 MHZ Itot Total Current Consumption mA 240 - 270 VB=5V Automatic Gain Control Receiving Power: -15-5dBm (According to customer requirements) Vo1 Output Voltage dBuV 73 75 77 Popt= -15~-5dBm @176.25MHz 42 channels T=25℃ OMI=4% per channel CTB Composite Triple Beat dB - - -57 Optical power- 0dBm 42channels PAL-D.176.25MHz OMI=4% per channel CSO Composite Second Order distortion dB - - -57 C- spurious Carrier to spurious dB 44 - - CNR Noise carrier rating dB 44 - - Optical power/- 8dBm 42channels PAL-D.176.25MHz OMI=4% per channel