MMIC-SG850 mmic amplifier

Applications: ● CATV optical receiver ● CATV Amplifier ● FTTH Network

Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node

Applications: ● Low Noise Amplifier for CATV, Satellite ● Cable Modem ● FTTH(G-PON,GE-PON) ● Optical node

Applications: ● Repeater ● FTTH(G-PON,GE-PON) ● CATV

SMO1025.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standarding ● GaAs MMIC ● High reliability ● FC/APC SC/APC   DESCRIPTION The SMO1025 has an FC/APC or SC/APC connector. Pin Description The amplifier supply voltage pin is connected to 24V(DC) . The CATV GaAs Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1005MHZ; Tmb＝25℃, VB＝24V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Responsivity V/W 850 - - λ=1300nm Flatness straight line dB - - ±0.75 f=40 to 1005 MHZ Output voltage dBμV - 88 - 110 channels flat; Popt= - 1dBm; CTB measured at 745.25 MHz; CSO measured at 746.5 MHz; Composite triple beat dB - -65 - Composite second order distortion dB - -63 - Carrier to noise ratio dB - -51 - Output return loss dB - -11 - f=40 to 1005 MHZ Total current consumption mA 240 - 290 VB=24V The module normally operates at VB=24 V(±0.5)

Download product specification:SMO3035.PDF FEATURES ● Excellent Linearit ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standard ● FC/APC SC/APC   DESCRIPTION The SMO3035 has an FC/APC or SC/APC connector. The amplifier supply voltage pin is connected to 3.5V(DC).The modules have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; T mb＝25℃, VB＝3.5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS S Responsivity V/W 850 - - λ=1310±20nm S Responsivity V/W 950 - - λ=1550±20nm FL Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Vo Output voltage dBμV - 90 - 60 channels flat; OMI=3.5% measured at 543.25 MHz; Optical power receiving at 0dBm CTB Composite triple beat dB 70 - - CSO Composite second order distortion dB 65 - - CNR Carrier to noise ratio dB 50 - - S22 Output return loss dB -11 - - f=40 to 870 MHZ Itot Total current consumption mA 70 - 100 VB=3.5V The module normally operates at VB=3.5 V(±0.5)

SDU R-ONU.PDF FEATURES ● Forward reception is1200-1600nm . Reverse emission wavelength is 1310nm ● Forward receiving optical power range: -6dBm — +2 ● Forward RF bandwidth is 54MHz—1002MHz，the output level is 25 ● Light power of reverse emission is 1MW or 2 ● Reverse RF bandwidth is 5MHz-42MHz, and the input level is 25dBmv. ● On the upper surface of the shell, there are forward optical power and 1V/mW receiving optical power test points. Reverse optical power indicator and 1V/mW transmitting optical power test point ● - 20dB RF output monitoring ports in the up and dow ● Low power consumption design, especially for the whole machine ● Adopting aluminum die-casting shell. Small size and exquisite. Good heat dissipation.   DESCRIPTION The R-ONU Mini node is a small home optical node specially developed for cable TV operators for standard networking, which provides users with two-way,interactive TV and network services. Compared with other two-way optical nodes, this series of products have the characteristics of small size, flexible networking and high performance-cost ratio.

Download product specification:SMO105A-DDM.PDF FEATURES ● The Optical Input controlled in the range of - 8dBm to +2dBm ● Single +5V Supply ● Extremely low nois ● Bandwidth 1000MH ● Monitor the temperature of high precisio ● Can control the RF signal closing and opening ● FC/APC SC/APC   DESCRIPTION The SMO105A-DDM AGC Optical Receiver Module has an FC/APC or SC/APC Connector. The amplifier supply voltage pin Connect to 5V(DC) .The modules have a monomode optical input Suitable for 1300 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical Output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS s responsively V/W 850 - - λ=1300nm-1600nm FL Flatness of frequency response dB - ±0.75 - f=40 to 1000 MHZ Vo Output Voltage dBuV 79 80 81 Popt= -8 ~ +2dBm,f=550MHz, CTB Composite Triple Beat dB - - -62 Test at Optical input Power –1dBm.84 PAL-D channels DS22,OMI=3.5%per channel CSO Composite Second Order distortion dB - - -61 CNR Noise carraier rating dB - 50 - S22 Output Return Loss dB -12 - - f=40 to 1000 MHZ Itot Total Current Consumption mA 230 250 280 VB=5V The module normally operates at VB=5 V If you want to know more about our product details,Please reply to get E-Catelog and FOC samples,Thank you.