AGC1011.PDF Product Features ● 40-1000MHz operating frequency range. ● High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch. ● 41dB Gain at 55MHz;41.5dB Gain at 1000MHz ● High dynamic gain range, 24dB Gain Control Range, Support 12dBm optical range. ● Single supply, Single +5V Sup ● Low power consumption, 180mA for one RF output at 5V supply voltage. ● Lead-free/RoHS compliant QFN4X4-24L package. Product Performance (Ta=25℃) Symbol Parameter1 Units Frequency Min. Typ. Max. G Trans-Impedance (Max. Gain State) dB 0.05 GHz 0.87 GHz 1GHz - 41.0 41.0 41.5 - G Range Gain Control Range dB - 24 - P-1dB dBm 0.45GHz - 20.5 - OIP3 Output IP3 dBm 0.45GHz - 34 - RL Output Return Loss dB 0.05-1 GHz - -15 - IDD Attenuator Current mA VDD=+5V 160 180 200 1. All measurements in a 75 Ohm system, unless otherwise specified. 2. Specified at maximum gain. 3. When the control voltage is changed, the attenuation is changed, Attenuation gain deviation is ±1.5dB.
Download product specification:SMO2506.PDF FEATURES ● Excellent Linearity ● High Optical Input Power Range ● Excellent Flatness ● Optimal Reliability ● Low Noise ● Outline Standarding ● FC/APC SC/APC DESCRIPTION The SMO2506 has an FC/APC or SC/APC connector. Pin Description.The amplifier supply voltage pin is connected to 6V(DC) . The CATV Optical Receivers have a mono mode optical input suitable for 1290 to 1600nm wavelengths a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75Ω. CHARACTERISTICS (Bandwidth 40 to 870MHZ; Tmb=25 VB=6V, ZS=ZL=75Ω) SYMBOL PARAMETER UNIT MIN. TYP. MAX. CONDITIONS Responsivity V/W 850 - - λ=1300nm Flatness straight line dB - - ±0.75 f=40 to 870 MHZ Output voltage dBµV - 93 - 60 channels flat; measured at 543.25 MHz; Optical power receiving at -1dBm Composite triple beat dB 62 - - Composite second order distortion dB 55 - - Carrier to noise ratio dB 50 - - Output return loss dB 10 - - f=40 to 870 MHZ Total current consumption dB 220 - 270 VB=6V The module normally operates at VB=6 V(±0.5)